+613 9792 5868

+613 9793 5742

BMW F10 M5 S63tu Turbo 5.0L Stroker Racing Engine

More Views

BMW F10 M5 S63tu Turbo 5.0L Stroker Racing Engine
$57,000.00

Availability: Out of stock

BMW F10 M5 S63tu Turbo 5.0L Stroker Racing Engine
Description

Details

This Engine is for those seeking the Ultimate High Performance Engine for max Boost and Power,

PPM Racing Australia has designed an Ultimate 5.0L Stroker version of BMW S63tu Turbo engine.

This engine is capable producing 1000WHP++.

As incredible as the BMW S63tu Turbo engine is in stock form, they do suffer from OEM Rod/Piston/Bearing failures due to the boost increase.

PPM Racing Australia has addressed all foreseeable issues with our fully billet internals and developed/built a 1000WHP++ HP Monster for those who are looking for the ultimate and best out of their S63tu engines…

Features and Specifications:

• Bore:92mm  with Custom Darton Sleeves / Stroke: 94mm Compression Ratio: 10:1 or 9.3:1

• PPM Racing Australia EN40B Billet Crankshaft with our special surface finishing

• PPM Racing Australia Ultimate Forged Pistons with 2x coatings,H13 pins and NPR Rings

• PPM Racing Australia Ultimate 300M Connecting Rods with our special surface finishing

• Balanced and blueprinted Race Engine

• ARP Custom Head and Main stud kit

• Custom Racing Harmonic Balancer

• ACL Racing Bearings

• Custom Turbo Camshafts

• Custom Racing Inconel Oversize Valves

• Custom Valve Springs

• Custom Titanium Retainers

• New Valve Stem Seals

• Custom MLS Head Gasket to suit larger Bore

• Stage 6 cylinder head porting and Polishing

• Serdi throat ports • Measure new valve guide interference , liquid nitrogen shrink fit new valve guides

• Size and hone finish valve guides

• Trim valve guide stem seal end for valve spring retainer to stem seal clearance

• Serdi seat work

• Rottler S7M machine head gasket surface with our MLS head gasket finish

• Thermal barrier coat combustion chambers

• Thermal barrier coat intake ports

• Thermal barrier coat exhaust ports

• Thermal barrier coat inlet valve heads upto valve guide on valve stem

• Thermal barrier coat exhaust valve heads upto valve guide on valve stem

• Flow bench test after

• Check and set valve spring pressures

• Final visual inspection

• Wrap Engine for Shipping

Customers Must Supply their Own Long Block  for this Built.....