This highly guarded secret by Aerospace, Formula 1,Nascar component manufacturers is out and now available here at PPM Racing!
Competitive racing parts are subject to very high loads, even shock loading, which means particular care must be taken over the final condition of a components surface. In the competitive racing industry, where striving for ultimate performance is an everyday matter, surface stress and surface finishing must be looked at in every situation and improvements can result in an increase in the endurance limit of 30% with life extensions of 30 times!
Transmission: Gears, shafts and circlips
Engine: Crankshafts, Connecting Rods, Valves, Pistons, Piston Rings, Fasteners, Camshafts, Cylinder Heads and Blocks
Suspension: Compression, tension and leaf springs and uprights
General: Wheels, nuts, gaskets and seat belt fitting
Surface reduction to mirror like finishes
Reduced contact/surface fatigue
Increased lubrication retention and heat transfer
Reduction in lubricant temperature
Optimum surface roughness and stress characteristics
Good rounding ability to sharp edges for ease of handling and assembly
Extend performance characteristics
Protect critical components
Enhance damage tolerance
Prevent premature failure
Achieve longer life at higher loads
Reduce manufacturing times and costs
Correction of manufacturing distortion
This special surface treatment is available here at PPM Racing for an extra cost, we can do this treatment to any of our components like our 4340 Billet Crankshafts and H-Beam Connecting Rods!
Please contact us for exsact pricing.