Connecting Rods
For Custom Billet Connecting Rod Orders Click this below order link :
Pure Performance Motorsport Sportsman H-Beam Connecting Rods are produced for 800+HP engines rated in excess of 200HP per cylinder and priced for everyday performance.
Features include,
- 1. 100% premium AISI4340 forged billet steel
- 2. Strict forge and heat treatment processed forgings, hardness of 36-42 HR C.
- 3. Aluminium/Silicon/Bronz alloy bushing
- 4. 3D software re-designed critical C-bore area, special CNC machining ensure smooth connection and free of sharp edge, significantly improved strength
- 5. Standard equipped with the best ARP 2000 bolts (220,000PSI) or Cust. Age 625+ bolts (260,000PSI) for extra cost.
- 6. Accurate sized and edge chamfered dowel sleeve for easy and accurate re-assembling.
- 7. Sunnen hone solution for all big bore and pin bore finishing.
- 8. Thread-end is blinded to same length as bolt
- 9. Radial grooved bushing crates an oil reservoir within PE improving pin lubrication.
Pure Performance Motorsport Ultimate H-Beam Connecting Rods are produced for 1000+HP engines rated in excess of 300HP per cylinder and priced for everyday performance.
Features include,
- 1. 100% premium AISI4340 forged billet steel
- 2. Strict forge and heat treatment processed forgings, hardness of 36-42 HR C.
- 3. Aluminium/Silicon/Bronz alloy bushing
- 4. 3D software re-designed critical C-bore area, special CNC machining ensure smooth connection and free of sharp edge, significantly improved strength
- 5. Standard equipped with the best ARP 2000 bolts (220,000PSI) or Cust. Age 625+ bolts (260,000PSI) for extra cost.
- 6. Accurate sized and edge chamfered dowel sleeve for easy and accurate re-assembling.
- 7. Sunnen hone solution for all big bore and pin bore finishing.
- 8. Enlarged mating surface increase mating area strength significantly and grinded mating surface makes re-assembling job accurate and easy.
- 9. Thread-end is blinded to same length as bolt
- 10. Radial grooved bushing crates an oil reservoir within PE improving pin lubrication.
- 11. Cap is designed thicker than beam to increase strength.
- 12. Special designed EP hole, establish arch form to undertake loading from BE.
- 13. Ribbed PE is standard feature to minimum PE distortion under interia load.
- 14. The oil groove on the big end surface is the standard feature.
Pure Performance Motorsport Ultimate I-Beam Connecting Rods are designed for the applications where rod strength is the number one concern, rated in excess of 300++HP per cylinder.
I-Beam Connecting Rods minimize the total weight.
- 1. 100% premium AISI4340 forged billet steel
- 2. Strict forge and heat treatment processed forgings, hardness of 36-42 HR C.
- 3. Aluminium/Silicon/Bronz alloy bushing
- 4. 3D software re-designed critical C-bore area, special CNC machining ensure smooth connection and free of sharp edge, significantly improved strength
- 5. Standard equipped with the best ARP Cust. Age 625+ bolts (260,000PSI)
- 6. Accurate sized and edge chamfered dowel sleeve for easy and accurate re-assembling.
- 7. Sunnen hone solution for all big bore and pin bore finishing.
- 8. Enlarged mating surface increase mating area strength significantly and grinded mating surface makes re-assembling job accurate and easy.
- 9. Thread-end is blinded to same length as bolt
- 10. Radial grooved bushing crates an oil reservoir within PE improving pin lubrication.
- 11. Cap is designed thicker than beam to increase strength.
